ULV Cold Fogging Machine, Thermal Fog

ULV Cold Fogging Machine Many pesticide concentrate labels do not recommend storing mixed product between uses. The fog produced by a thermal fogger is thick, white to gray in color, and is easily visible. Apart from the droplet size they produce, manual sprayers can be very time consuming and labour intensive.

ULV Cold Fogging Machine Models

ULV Cold Fogging Machine This vaporizes the insecticide from its liquid state. These are used in industrial areas as well as in many tropical countries to control mosquito-borne diseases. Fill the fogger with some clean water and operate again for one minute. Features include a 2L tank, advanced 12V DC motor from LG electronics, two speed control and an adjustable nozzle producing droplet sizes between 5-30 microns.

ULV Cold Fogging Machine When it comes to spraying volume means nothing, coverage means everything. Fitted with a new larger 4-litre tank and our exclusive 1250 Watt Samsung motor, this fogger can produce a powerful flow rate between 30-60 LPH and can easily cover an area of 100 m2 in less than a minute. This cold fogger utilizes a 10,000 rpm rotary atomizer generating adjustable droplets sizes between 20 and 50 μm.

ULV Cold Fogging Machine

ULV Cold Fogging Machine With its large 1.59 gallon tank, this fogger can cover a large area without the need of refilling. This means that you must have a power outlet near the area to be fogged or an extension cord that can reach the target area. All of these foggers use heat to vaporize the fogging solution.

The unit includes a cleaning tool for this purpose. This is because conventional sprayers spray larger droplet sizes in between 100-200 microns, which don’t fully cover the whole area being sprayed. Although ULV foggers cannot produce such small particles as thermal foggers, some ULV foggers can produce particles from 5-20 micron range, which is effective for mosquito control.

On plants and greenhouses. Whenever using thermal foggers, safety equipment is a must. Because fog that a thermal fogger produce is thick and easily visible, you can more easily control the direction of fogging.

The hot gases created by the combustion of fuel are forced into the engine tube creating an extremely hot collection of air and gas. The motors of most handheld foggers are approximately 1-3 horsepower (HP) but vehicle-mounted foggers have much more powerful motors, up to 20 HP. Some cold foggers use oil-based fogging solutions while others use water-based solutions. After every four hours of use, the engine tube must be cleaned. manufactures and distributes & seller one of the biggest ranges of ulv fogger equipment in the world.

It is generally accepted by industry professionals that fogging is the most efficient method of control, as only small amounts of pesticides get used in the process. When pesticide is added to this, it vaporizes and is then forced out of the end of the engine tube along with the engine exhaust as fog. On top of the fogging machine’s engine compartment, there is a handle with a small button. Also, allow to adjust particle size, so they can be used in more applications than thermal foggers. These are perfect for use in warehouses, factories, dairy, poultry barns, food processing plants and greenhouses.

Thermal fogging is used to control the population of these insects in towns and farms. Once you’ve ensured the ignition system is functioning, depress and release the primer bulb until fuel is visible in the bulb. However, unlike ULV Foggers which use cool, low-pressure air currents to produce fog, thermal foggers use heat to actually vaporize a fogging solution and spray it out of a nozzle in the form of fog.

Fogging can be used to eradicate parasites living in empty sheds or stables prior to housing. Some fungi can cause serious diseases in humans, several of which may be fatal if untreated. Place the fogging machine in an uncongested, well-ventilated work area away from flammable materials.

The larger gas engine powered units are often used for golf courses, warehouses, rooftops, etc. Since thermal foggers work with high temperatures, they aren’t safe for indoor use. For odor control and disinfection.

Operate the fogger for one minute with the nozzle turned fully anti-clockwise. One of the most powerful and durable ULV machines of its size, this cold fogger has been designed to deliver ultra fine droplets of hypochlorous acid (HOCl). In the case of our recommended model, the engine is gas-powered, though on other models it may be electric.